Technical Data - Bosch GSL 2 Professional Notice Originale

OBJ_BUCH-1545-005.book Page 14 Monday, December 10, 2012 11:06 AM
14 | English
17 Button for step-by-step rotation in clockwise direction
18 Button for slow rotation in clockwise direction
19 Button for fast rotation in clockwise direction
20 Battery lid of the remote control
21 Battery lid latch of the remote control
22 Serial number

Technical Data

Surface laser
Article number
Remote-controlled, motor-driven rotation base
1)
Working range
– without laser target plate
– with laser target plate
Levelling Accuracy
Self-levelling range, typically
Levelling duration, typically
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
6
Batteries (alkali-manganese)
Battery pack (lithium-ion)
Battery life
– Batteries (alkali-manganese)
– Battery pack (lithium-ion) (1.3 Ah)
– Battery pack (lithium-ion) (1.5 Ah)
Weight according to EPTA-Procedure 01/2003
Dimensions (length x width x height)
Degree of protection
1) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun irradiation).
For clear identification of your surface laser, see the serial number 12 on the type plate.
Remote Control
Article number
2)
Working range
Operating temperature
Storage temperature
Batteries
Weight according to
EPTA-Procedure 01/2003
2) The working range can be decreased by unfavourable environmental
conditions (e.g. direct sun irradiation).
For clear identification of your remote control, see the serial number 22
on the type plate.
1 618 C00 75G | (10.12.12)
Accessories/Spare parts
24 Laser viewing glasses*
25 Case
* The accessories illustrated or described are not included as
standard delivery.
630 –670 nm, <5 mW
4 x 1.5 V LR06 (AA)
210 x 195 x 205 mm
IP 54 (dust and splash
Assembly
RC 2
3 601 K69 C00
Power Supply of the Surface Laser
20 m
The measuring tool can either be operated with commercially
–10 °C...+50 °C
available batteries or with a Bosch lithium ion battery pack.
–20 °C...+70 °C
Operation with Batteries (see figure B)
3 x 1.5 V LR03 (AAA)
Alkali-manganese batteries are recommended for the meas-
uring tool.
50 g
For installation and removal of the batteries, the measuring
tool's height adjustment must be set to the lowest position.
For this, turn the thumbwheel for height adjustment 9 in anti-
clockwise direction to the stop.
To open the battery lid 7, press on the latch 6 and fold the bat-
tery lid up. Insert the batteries. When inserting, pay attention
GSL 2
3 601 K64 000
–
10 m
20 m
±0.3 mm/m
±4°
<5 s
–10 °C...+50 °C
–20 °C...+70 °C
90 %
3R
630 –670 nm, <5 mW
1
4 x 1.5 V LR06 (AA)
10.8 V
15 h
15 h
25 h
1.4 kg
210 x 195 x 205 mm
IP 54 (dust and splash
water protected)
GSL 2 Set
3 601 K64 001
3 601 K64 070
3 601 K64 0R0

10 m
20 m
±0.3 mm/m
±4°
<5 s
–10 °C...+50 °C
–20 °C...+70 °C
90 %
3R
1
10.8 V
15 h
15 h
25 h
1.4 kg
water protected)
Bosch Power Tools