Device Description; Initial Use; Insert The Batteries; Choosing And Fitting A Brush Attachment - Beurer FC 25 Mode D'emploi

6. Device description

2
3
1 Body brush
2 ON/OFF/speed button
3 Battery compartment lid

7. Initial use

7.1 Insert the batteries

Turn the battery compartment lid. Insert 4 AA batteries in accordance with the
marking. Reapply the battery compartment lid, ensuring correct alignment.
7.2 Choosing and fitting a brush attachment
The device has 2 different attachments.
Cleaning attachment: For daily cleansing
Exfoliation attachment: For exfoliating in the shower and in the bath in order
to gently remove excess skin cells
1. Carefully fit your desired attachment onto the body brush as shown
until you can hear and feel it click into place.
2. To remove the attachment again after use, pull it carefully off the body
brush.

8. Use

8.1 Cleansing treatment function

The cleansing treatment function using the cleansing attachment is ideally suited to daily cleansing of the skin.
To start the cleansing treatment function, proceed as follows:
1. Ensure that the cleansing attachment is attached to the body brush.
2. To switch on the body brush, press the ON/OFF/speed button. The cleansing attachment starts to rotate. We rec-
ommend that you start by using the slow speed setting. To choose the fast speed setting, press the ON/OFF/
speed button again.
3. Gently move the body brush in circular motions over your skin. Start with your feet and work upwards from there
in the direction of your legs, buttocks, stomach, back, chest, arms and hands. Do NOT use the body brush on the
face or in the pubic area. If the treatment is unpleasant, stop using the device or reduce the speed setting.
1
4
4 Cleaning attachment: For daily cleansing
5 Exfoliation attachment: For revitalising exfoliation
12
5