Remote Control Display - Panasonic CS-VE9NKE Guide Rapide

REMOTE CONTROL
Human activity sensor
Maximum distance: 7m
Remote
Control display
2
6
F568728_YB0512-1062.indb 6 F568728_YB0512-1062.indb 6
POWER
(Green) (Green)
Movable panel
Press the remote control's button
1
AUTO mode - For your convenience
• During operation mode selection the power indicator blinks.
• Unit selects operation mode every 30 minutes according to
temperature setting, outdoor and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks during this
operation.
• This air conditioner removes frost automatically by two types of
operation.
• Unit removes ice formed on outdoor unit by methods below.
• Deice with heating operation (HEAT CHARGE Operation).
• Deice without heating operation
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to reduce power
1
consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling operation.
MOVABLE PANEL
3
• Opens for air intake when operation starts, and closes when operation
stops. During this time, do not hold it as it may cause malfunction or
breakdown.
Indicator
NANOE-G
(Blue)
TO SELECT OPERATION MODE
Unit has a heat absorbing device which accumulates heat
generated by outdoor unit while performing the heating operation
to remove ice formed on outdoor unit for maximum 6 minutes.
During this operation, the discharge temperature and fan speed
may be lowered when outdoor temperature is low, or the room is
not warmed up suffi ciently, or set temperature is high.
Unit stops heating operation to remove large amount of ice
formed on outdoor unit for maximum 12 minutes.
During this operation, the power indicator blinks and the vertical
airfl ow direction louver is left open.
The heating operation resumes once this operation is completed.
TIMER +8/10°C
(Orange) (Green)
POWER
6/11/2012 9:43:26 AM 6/11/2012 9:43:26 AM