Display; Operation - SKF TMSP 1 Mode D'emploi

2.2 Display

Symbol
LCD
MAX
MIN
FAST
SLOW
dBA
dBC
AUTO

3. Operation

• Windscreen (1)
If you operate at wind speed over 10 ms, put protective accessories
over the microphone.
• Power & Backlight button (3)
The key turns the sound level meter ON or OFF and backlight ON & OFF.
Press it once to turn on the sound level meter.
Press it again for moment to turn ON or OFF backlight.
Press and hold this button 3 second to turn OFF the power.
MAX / MIN hold button (4)
•
Press
mode. Select the proper Level range before using MAX/MIN to
ensure that reading value will not exceed the measurement range.
Press once to select MAX value. Press again to select MIN value, and
press again to select current value with " MAX/MIN " annunciator
blinking. Press
the MAX/MIN mode.
6
Function
4 digits
Maximum indication
Minimum indication
Over range
Under range
Fast response
Slow response
A-Weighting
C-Weighting
Range Indicate
Low Battery
Under range 20 dB
Auto Level range selective
button to enter the maximum and minimum recording
and hold down button for 2 seconds to exit
SKF TMSP 1