Remarks; Operating Precautions; Environment Conditions; Maintenance And Cleaning - SKF TMSP 1 Mode D'emploi

5. Remarks

• Battery Loading:
Remove the battery cover on the back and put in one 9V Battery.
• Battery Replacement:
When the battery voltage drops below the operating voltage, this
symbol will appear
• AC Adapter Connection:
When the AC adapter is used, insert the plugs of the adapter into the
DC9V connector on the side panel.

5.1 Operating precautions

• Wind blowing across the microphone would bring additional
extraneous noise. When using the instrument in the presence
of wind, it is a must to mount the windscreen to not pick up
undesirable signals.
• Calibrate the instrument before operation if the instrument was not
in use for a long time or operated in bad environment.
• Do not store or operate the instrument at high temperature and high
humidity environment.
• Keep microphone dry and avoid severe vibration.
• When not in use: Take out the battery and keep the instrument in
low humidity environment.

5.2 Environment conditions

• Altitude up to 2 000 meters.
• Relatively humidity 90% max.
• Operation Ambient 0 ~ 40 ºC.

5.3 Maintenance and cleaning

• Repairs or servicing not covered in this manual should only be
performed by qualiied personnel.
• Periodically wipe the case with a dry cloth.
• Do not use abrasives or solvents on this instrument.
SKF TMSP 1
. Replace 9 Volt battery.
11