Fm/Mw/Lw; Storing Automatically - Btm; Storing Manually; Receiving The Stored Stations - Sony CDX-DAB700U Mode D'emploi

4
Rotate the control dial to select "ON"
or "OFF," then press it.
Notes
• The DAB announcement feature is available
when turned to other than the MW/LW bands.
• During a DAB announcement, the volume is
adjusted to the level set for TA in RDS
(page 11).
Type of announcement
ALARM (Alarm), TRAFFIC (Road Traffic
Flash), TRAVEL (Transport Flash),
WARNING (Warning/Service), NEWS
(News Flash), WEATHER (Area Weather
Flash), EVENT (Event Announcement),
SPECIAL (Special Event), RAD_INFO
(Program Information), SPORTS (Sport
Report), FINANCE (Financial Report)
Listening to the same program even
during weak reception
Set "DAB/FM LINK" to "ON" (page 27).
"FM-LINK" lights up when the
corresponding FM program is being
received.
Updating the service list
automatically — Auto scan
Press  repeatedly until
1
"TUNER" appears.
2 Press  repeatedly to select
"DAB1," "DAB2" or "DAB3."
3
Press and hold the select button.
4
Rotate the control dial until "AUTO
SCAN" appears, then press it.
The unit updates the list of services in
Quick-BrowZer mode.
10

FM/MW/LW

Caution
When tuning in stations while driving, use
Best Tuning Memory (BTM) to prevent an
accident.
Storing automatically — BTM
Press  repeatedly until
1
"TUNER" appears.
To change the band, press 
repeatedly. You can select from FM1,
FM2, MW or LW.
2
Press and hold the select button.
The setup display appears.
3
Rotate the control dial until "BTM"
appears, then press it.
The unit stores stations in order of
frequency on the number buttons.

Storing manually

1
While receiving the station that you
want to store, press and hold a number
button ( to ) until "MEMORY"
appears.

Receiving the stored stations

1
Select the band, then press a number
button ( to ).