Before Returning For Repairs - Schumacher Electric SJ1332 Manuel D'utilisation

Masquer les pouces Voir aussi pour SJ1332:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PROBLEM
The unit won't power
my 12V device.
The battery in the unit
won't hold a charge.

9. BEFORE RETURNING FOR REPAIRS

For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485.
DO NOT SHIP UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION
(RMA) number from Customer Service at Schumacher Electric Corporation.
10. SPECIFICATIONS
Internal Battery Type .....................................Sealed, Maintenance Free, AGM, Lead-Acid
Nominal Voltage ......................................................................................................12V DC
DC Power Output (Maximum Continuous Load).................... 20A (both outlets combined)
Jumper Cables ..................................................................................................4 AWG, 24˝
Dimensions (H x W x D)......................................................................... 12" x 11.5" x 10.5"
Weight ................................................................................................... 23.9 lbs (10.84 kg)
AC Power Specifications
Maximum continuous power ............................................................................... 200 Watts
Surge capacity (peak power) .............................................................................. 400 Watts
No load current draw.......................................................................................... <0.4 Amps
Wave form .............................................................................................Modified sine wave
Input voltage range ...................................................................................10.5 – 15.5V DC
AC outlets .......................................................................(2) 120V AC 3-prong NEMA 5-15
POSSIBLE CAUSE
The 12V device is not turned on.
The internal battery is not
charged.
The 12V device draws more
than 20A, has a short circuit, or
the internal fuse has blown.
The battery is bad (will not
accept a charge).
If these solutions do not eliminate the problem,
or for more information about troubleshooting,
contact customer service for assistance:
services@schumacherelectric.com
www.batterychargers.com
or call 1-800-621-5485
Monday-Friday 7:00
Turn on the 12V device.
Check the battery charge status by
pressing the button on the front of
the unit. See Checking the Level of
the Internal Battery.
Disconnect the 12V device.
The internal 20A fuse needs
replacement by a qualified
service person.
Have the battery checked.
to 5:00
CST
am
pm
• 8 •
SOLUTION

Publicité

Table des Matières
loading

Table des Matières