Description; 1. Front Panel (Fig. I. 1); 2. Rear Panel (Fig. I. 2); 3. Humidifier Installation (Optional) (Fig. I. 3) - AirSep VisionAire Manuel D'utilisation

GB
- The device is used in accordance with the instructions for use." If the replacement parts used
for the periodic servicing by an approved technician do not comply with the manufacturer's
specifications, the latter is absolved from all responsibility in the event of an accident. Do not open
the device whilst in operation: risk of electrical shock. This device complies with the requirements
of the 93/42/EEC European directive but its operation may be affected by other devices being used
close by, such as diathermy and high frequency electro-surgical equipment, defibrillators, short
wave therapy equipment, mobile telephones, CB and other portable devices, microwave ovens,
induction plates or even remote control toys and more generally electromagnetic interferences
which exceed the levels specified by the EN 60601-1-2 standard.
I. DESCRIPTION
The VisionAire
™
home or in the hospital. It provides a continuous flow of oxygen air by separating the oxygen and
nitrogen contained in ambient air.
The VisionAire
™
the device to be easily adjusted to the prescribed flow rate.
Note: the performances described only concern the use of the VisionAire
with the accessories recommended by the manufacturer.
I. 1.
Front panel
1 Power switch
2 Circuit breaker
3 Hour meter
4 Oxygen air outlet
5 Flow adjustment knob (l/min.)
6 Safety instructions
7 Oxygen monitor LED
I. 2.
Rear panel
8 Humidifier recess
9 Manufacturer's label
10 Electrical power cable
I. 3.
Humidifier installation (optional)
11 Humidifier
12 Humidifier fitting
13 Humidifier oxygen outlet
14 Humidifier tubing
15 Oxygen tubing/cannula
2-GB
is an oxygen concentrator designed to satisfy oxygen therapy prescriptions at
is easy to use and ergonomic. The single flow adjustment knob allows
(Fig. I. 1)
(Fig. I. 2)
(Fig. I. 3)
VisionAire
™
™
AirSep Corporation
®
MN137-1 Rev B. 11/09