Intended Use Of Device; Technical Information - BiAL ELS Mode D'emploi

Intended use of device

The heating element is an electric device
intended solely for installation in radiators
(standalone or connected to the central
heating system) to serve as space heaters,
or clothes and towels dryer.

Technical information

(power cable type):
Type of electrical connection:
Heat outputs available:
Towel rail connection thread:
Casing protection class [IP]:
Length of heating element:
* Device intended to be connected permanently to the system
12
Model markings PB (Straight cable without plug) *
PW (Straight cable with plug)
SW (Spiral cable with plug)
Y
120, 200, 300, 400, 600, 800, 1000 [W]
Power supply: 230 V / 50 Hz
Insulation class: Class I
G 1/2"
IPx5
120 200 300 400 600 800 1000
315 275 300 335 365 475 565
Heating element power output should be
matched with radiator output for parame-
ters of 75/65/20° C
[W]
[mm]