BiAL ELS Mode D'emploi page 14

8. Follow the subsequent guidelines when
connecting the electrical installation:
a. Brown wire — live connection to the
circuit (L).
b. Blue wire — connect to neutral (N)
c. Yellow & green wire — earth con-
nection (PE).
9. Before filling the radiator with heating
medium, ensure that the heating ele-
ment is fitted properly and that it is wa-
ter tight.
10. In central heating system radiator must
be fitted with the valves enabling dis-
connection of the radiator from the rest
of the system.
11. The temperature of the heating agent
in the central heating system must not
exceed 82° C!
Notes prior to removal:
1. Before dismantling permanently, dis-
connect the heating element from the
mains and ensure that the radiator is
not hot.
2. Be aware. A radiator filled with liquid
can be very heavy. When moving the
radiator, ensure that you take the nec-
essary safety precautions.
14
3. Before disassembly, close the appropri-
ate valves and drain the radiator com-
pletely to avoid causing any damage.
Product disposal
This product should not be disposed of
as general waste but should be brought
to the appropriate collection point for re-
cycling of electric and electronic devices.
This information is provided by the sign on
the product, user manual and packaging.
Information on the appropriate point for
used devices can be provided by your local
authority, product distributor or the store
from where the product was purchased.
Thank you for your effort towards protect-
ing the environment.
Maintenance
• Before performing maintenance, always
unplug the unit from the mains system.
• Periodically check the fluid level in the
radiator and ensure the heating ele-
ment is completely submerged.
• Clean the product with a dry or damp
cloth. If necessary, use a very small
amount of detergent, ensuring that it
contains no solvents or abrasives.