BiAL ELS Mode D'emploi page 9

6. Before installing or removing the device, make sure it
is disconnected from the power source.
7. Do not open the device — any interference with inter-
nal components will invalidate the warranty.
8. The heating element's power output must not ex-
ceed the radiators power output for the parameters
75/65/20° C .
9. The pressure in the radiator should not exceed 10 atm.
Ensure that an air cushion is preserved in electric radi-
ators. In central heating systems, leave one valve open
to prevent pressure build up due to the thermal ex-
pansion of the liquid.
10. The device is intended for home use only.
11. Fitting and Installation of the device must be carried
out in accordance with all local regulations for elec-
trical safety, including installation within permissi-
ble locations only. Observe bathroom electrical zone
regulations.
EN
9