BiAL ELS Mode D'emploi page 13

Installation or removal
Detailed information demonstrating the
different ways of installing or removing
a radiator heating element is available
from the manufacturer or importer (see
footnotes at the end of the manual). Below
we list some basic requirements and princi-
ples which must be followed to ensure long
term, reliable operation of the product.
EN
Before installation or first use:
1. Read the chapter Safety requirements
—Installation.
2. Fit the heating element using the cor-
rect spanner (size
3. The heating element must be installed
at the bottom of the radiator, perpen-
dicular to the radiator pipes, while pre-
serving space for the proper circulation
of the heating medium.
4. Use a suitable heating medium for fill-
ing the electric radiator, i.e. (water, spe-
cial products based on water and glycol
for use in central heating systems, or oil
which complies with the requirements
of the manufacturer of the radiator and
heating element).
5. Do not switch the heating element on if
it is not fully immersed in radiator heat-
ing medium.
6. Make sure an adequate air cushion is
present to protect against excessive pres-
sure build up within the heater (always
leave one of the radiator valves open).
7. When filling the radiator with hot liquid
insure that the liquid temperature does
not exceed 65° C.
22).
13