Intended Use Of Device; Technical Information - BiAL ILS Mode D'emploi

Intended use of device

The heating element is an electric device
intended solely for installation in radiators
(standalone or connected to the central
heating system).

Technical information

(power cable type):
Type of electrical connection: Y
Towel rail connection thread: G 1/2"
Casing protection class [IP]: IPx5
The maximum pressure allowed
Length of heating element: 400 600 800 1000 [W]
* Device intended to be connected permanently to the system
10
Model markings
PB (Straight cable without plug) *
Power supply: 230 V / 50 Hz
Insulation class: Class II
1.0 MPa
in the radiator:
350 465 600 670 [mm]
Heating element power output should be
matched with radiator output for parame-
ters of 75/65/20° C