General Safety Precautions; Before Using A New Chain Saw; Important; Always Use Common Sense - Husqvarna Jonsered CS 2234 Manuel D'utilisation

Before using a new chain saw

• Please read this manual carefully.
• (1) - (50) refer to figures on p. 2-5.
• Check that the cutting equipment is correctly fitted
and adjusted. See instructions under the heading
Assembly.
• Refuel and start the chain saw. See the instructions
under the headings Fuel Handling and Starting and
Stopping.
• Do not use the chain saw until sufficient chain oil has
reached the chain. See instructions under the
heading Lubricating cutting equipment.
• Long-term exposure to noise can result in permanent
hearing impairment. So always use approved
hearing protection.
WARNING! Under no circumstances
!
may the design of the machine be
modified without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
WARNING! A chain saw is a dangerous
!
tool if used carelessly or incorrectly
and can cause serious, even fatal
injuries. It is very important that you
read and understand the contents of
this operator's manual.
WARNING! The inside of the muffler
!
contain chemicals that may be
carcinogenic. Avoid contact with these
elements in the event of a damaged
muffler.
WARNING! Long term inhalation of the
!
engine's exhaust fumes, chain oil mist
and dust from sawdust can represent a
health risk.
WARNING! This machine produces an
!
electromagnetic field during operation.
This field may under some
circumstances interfere with active or
passive medical implants. To reduce the
risk of serious or fatal injury, we
recommend persons with medical
implants to consult their physician and
the medical implant manufacturer before
operating this machine.
8 – English

GENERAL SAFETY PRECAUTIONS

Important

IMPORTANT!
The machine is only designed for cutting wood.
You should only use the saw with the bar and chain
combinations we recommend in the chapter Technical
data.
Never use the machine if you are fatigued, while under
the influence of alcohol or drugs, medication or
anything that could affect your vision, alertness,
coordination or judgement.
Wear personal protective equipment. See instructions
under the heading Personal protective equipment.
Do not modify this product or use it if it appears to have
been modified by others.
Never use a machine that is faulty. Carry out the checks,
maintenance and service instructions described in this
manual. Some maintenance and service measures
must be carried out by trained and qualified specialists.
See instructions under the heading Maintenance.
Never use any accessories other than those
recommended in this manual. See instructions under
the headings Cutting equipment and Technical data.
CAUTION! Always wear protective glasses or a face
visor to reduce the risk of injury from thrown objects. A
chain saw is capable of throwing objects, such as
wood chips, small pieces of wood, etc, at great force.
This can result in serious injury, especially to the eyes.
WARNING! Running an engine in a
!
confined or badly ventilated area can
result in death due to asphyxiation or
carbon monoxide poisoning.
WARNING! Faulty cutting equipment or
!
the wrong combination of bar and saw
chain increases the risk of kickback!
Only use the bar/saw chain
combinations we recommend, and
follow the filing instructions. See
instructions under the heading
Technical data.

Always use common sense (2)

It is not possible to cover every conceivable situation you
can face when using a chain saw. Always exercise care
and use your common sense. Avoid all situations which
you consider to be beyond your capability. If you still feel
uncertain about operating procedures after reading
these instructions, you should consult an expert before
continuing. Do not hesitate to contact your dealer or us if
you have any questions about the use of the chain saw.
We will willingly be of service and provide you with
advice as well as help you to use your chain saw both
efficiently and safely. Attend a training course in chain
saw usage if possible. Your dealer, forestry school or your
library can provide information about which training
materials and courses are available. Work is constantly
in progress to improve the design and technology -
improvements that increase your safety and efficiency.
Visit your dealer regularly to see whether you can benefit
from new features that have been introduced.
1156564-26 Rev.1 2014-01-13