AEG S73200CNS1 Notice D'utilisation page 38

38 www.aeg.com
A
B
C
1
2
• Remove using a tool the cover (A). Un-
screw the lower hinge pivot (B) and the
spacer (C) and place them on the oppo-
site side.
• Re-insert the cover (1) on the opposite
side.
• Remove the plugs on the upper side of
both doors and move them to the other
side
• Re-insert the lower door on the lower
hinge pivot .
• Insert the middle hinge into the left drill
of the lower door.
• Unscrew the upper hinge pivot and
place it on the opposite side.
• Fit the upper door on the upper door
pivot.
• Re-insert the upper door on the middle
1
hinge pivot slightly tilting both doors.
• Re-screw the middle hinge . Do not for-
get the plastic spacer .