Bosch Indego M 700 Notice Originale page 29

Main Menu Sub-menu 1
Security
Date & Time
Set Language
Info
Advanced
Tools
Bosch Power Tools
Sub-menu 2 Explanation
Auto Lock If buttons are not pressed for 3 min. they will be automatically
locked.
Recommended for safety reasons and protection against theft.
– On PIN code is required for reactivation after Auto Lock.
– Off The buttons are always ready for input.
Change PIN Changing of a PIN code requires entering of existing PIN code first.
Alarm
– On Alarm is activated.
– Off Alarm is deactivated.
Change the date and time.
Change the display language.
System status Information on battery charge, system information and operating
and charging time for the mower.
Wire ID Change the perimeter wire ID when possible interferences are
nearby.
Sensor setting/ Select between Low (uneven ground), Normal and High (slippery
Lawn condition ground). Mower bump sensor will become more or less sensitive
depending on lawn condition selected.
Remap Deletes the current map of the garden.
Factory Reset Reset the mower to factory settings will delete all personal set-
tings (not PIN).
After a factory reset, the mower will need to remap the garden/s.
Garden Overview Displays the number of mapped gardens, their size, their wire ID
and the date of the last time the garden was cut.
Delete garden Delete one specific garden map or select to delete all maps at
once.
Name mower Change the name shown in the display. Only letters of the Latin al-
phabet are possible. The number of letters is limited. This function
is not available in every language.
In some languages (e.g. Czech or Polish) a name change doesn't
have any effect on display due to specific grammar requests.
Level check Information about the ground angle of the mower. If the mower is
in the docking station and the dot on the display is not within the
indicated circle, the docking station must be mounted at a new,
more level location.
Wire signal Detects the wire signal received from the perimeter wire, indicat-
ing its strength (for Service Agent).
The mower will not receive a wire signal while in the docking sta-
tion.
English | 29
F 016 L81 885 | (23.10.2019)