Quickie Jive M2 Sedeo Ergo Manuel D'utilisation page 52

WARNING!
• If you are in any doubt about the performance requirements
of your wheelchair contact your Sunrise Medical authorised
dealer.
• After performing any maintenance or repairs on the
wheelchair you must make sure that it is functioning correctly
before it is used.
• A complete inspection, safety check and service should be
made by a Sunrise Medical authorised dealer at least once
per year.
• All fasteners must be replaced like for like using the correct
length, tensile strength and materials.
Maintenance & Inspection Schedule
Check battery level indicator and charge if necessary
Check the joystick of the hand control is not bent or damaged
Ensure all parts and assemblies are securely fastened
Checkanterior pelvic support for wear and make sure the buckle is
operational
Motor Brake Test
Check tyre condition and wheel fasteners.
Ensure lights and indicators, (where fitted), are operational and
clean
Ensure all cables and connectors are sound and are tidy and out of
the way
Check upholstery, seating, headrests, arm pads and calf pads for
wear.
Inspect all nuts, bolts, studs and fasteners for damage and tightness.
Contact your authorised dealer for service assistance.
Clean wheelchair upholstery
Check Front Castor Arms Safety Lock for correct operation.
Check battery terminals for tightness etc.
Complete inspection, safety check and service should be made
by a Sunrise Medical authorised dealer
*
Daily = Before each use of the wheelchair.
52
Jive M2 Sedeo Ergo
• When replacing self-locking nuts, or nuts/studs secured
with a thread locking solution, ensure that a suitable thread
locking solution is reapplied to the fastener.
• Check all Velcro fastening straps for correct adhesion when
pressed together.
• Ensure that any contamination, such as fluff, hair,etc is
removed from the Velcro straps. Such contamination may
affect adhesion.
¯
¯
¯
¯
¯
¯
¯
¯
¯
Rev.2.0