Cameo FLAT STAR Manuel D'utilisation page 8

AUTOMATIC CONTROL (Auto)
In the main menu, use the UP and DOWN buttons to select the menu item ModE and confirm with ENTER, then select Auto and confirm
again with ENTER. Use the UP and DOWN buttons to select the desired category from the three different programme categories ALL, LEd
and SMD and confirm with ENTER (ALL = centre LEDs RGBWA+UV plus SMD LED ring, LEd = centre LEDs RGBWA+UV, SMd = SMD LED
ring). Using the UP and DOWN buttons, you can now select one of the auto programmes from the respective programme category (Au01-
Au08). After you have confirmed the entry by pressing ENTER, use the UP and DOWN buttons to adjust the overall brightness of the centre
LEDs from di00 to di99 and confirm with ENTER (brightness of the SMD LED ring is not adjustable). Use the UP and DOWN buttons to select
the desired programme run speed in the selected menu item (SP00 = minimum speed, SP99 = maximum speed). Confirm with ENTER. If
the operating buttons are inactive for approximately one minute, the display changes to 'Auto'.
-> ENTER -> UP/DOWN
/
/
MUSIC-CONTROLLED PROGRAMMES (Soun)
In the main menu, use the UP and DOWN buttons to select the menu item ModE and confirm with ENTER, then select Soun and confirm
again with ENTER. Use the UP and DOWN buttons to select the desired category from the three different programme categories ALL, LEd
and SMD and confirm with ENTER (ALL = centre LEDs RGBWA+UV plus SMD LED ring, LEd = centre LEDs RGBWA+UV, SMd = SMD LED
ring). Use the UP and DOWN buttons to adjust the overall brightness of the centre LEDs from di00 to di99 and confirm with ENTER
(brightness of the SMD LED ring is not adjustable). Using the UP and DOWN buttons, you can now select one of the music-controlled
programmes from the respective programme category (SP01-SP08). The sensitivity with which the programmes react to sound (bass
impulses) can be set as required using the MIC SENSITIVITY control. Turn anti-clockwise to reduce sensitivity and clockwise to increase
sensitivity. If the operating buttons are inactive for approximately one minute, the display changes to 'Soun'.
-> ENTER -> UP/DOWN
MASTER/SLAVE MODE (SLAV)
In the main menu, use the UP and DOWN buttons to select the menu item ModE, confirm with ENTER and then activate the slave mode,
by selecting the menu item SLAV by using UP AND DOWN and confirm with ENTER. Connect the slave and the master unit (same model)
with a DMX cable (Master = DMX OUT, Slave = DMX IN) and enable one of the standalone modes on the master unit (automatic-control,
music-controlled programmes, colour-blend, static). Now the slave unit will follow the master unit.
-> ENTER
<- MODE
8
-> ENTER ->
-
UP/DOWN
<- MODE
-> ENTER ->
-
UP/DOWN
<- MODE
-> ENTER ->
-
UP/DOWN
<- MODE
-> ENTER ->
UP/DOWN
<- MODE
/
-> ENTER ->
UP/DOWN
<- MODE
/
-> ENTER ->
UP/DOWN
<- MODE
-> ENTER ->
UP/DOWN
<- MODE
-> ENTER ->
UP/DOWN
<- MODE
-> ENTER ->
UP/DOWN
<- MODE
-> ENTER ->
-
UP/DOWN
<- MODE
-> ENTER ->
-
UP/DOWN
<- MODE
-> ENTER ->
-
UP/DOWN
<- MODE
-> ENTER ->
-
UP/DOWN
<- MODE
-> ENTER ->
-
UP/DOWN
<- MODE
-> ENTER ->
-
UP/DOWN
<- MODE
-
-> ENTER
-
-> ENTER
-
-> ENTER
-> ENTER
-
<- MODE
-> ENTER
-
<- MODE
-> ENTER
-
<- MODE