Parking Brakes; Accessories; Side Supports (L04) - Vermeiren INOVYS Mode D'emploi

PARKING BRAKE
The brake serves only as a parking brake and not to brake the wheelchair when it is moving.
2

ACCESSORIES

As additional equipment for your multi-function wheelchair use only the original accessories from the
wheelchair manufacturer and observe the following tips:
A
A
To activate the brake, press the lever
forwards. To release the brake, press the
lever backwards.
1
Loosen
suspension with which the brake unit is
connected to the frame without removing it
from the frame (1). Push the brake unit into
the desired position (2) and then tighten both
screws firmly.
L
•

SIDE SUPPORTS (L04)

The side supports can be lowered and are adjustable
in height, width and length. The sockets are behind
the back beneath the pushing handles.
ATTACHING
Place the support into the support socket behind the
back in such a way that the head of the adjusting
screw (A) fits into the slot of the support socket.
LOWERING
Lift the support until the head of the adjusting screw
(A) has left the slot of the support socket. Turn the
support inwards or outwards, whereby the head of the
adjusting screw (A) can be guided on the edge of the
support socket.
B
HEIGHT ADJUSTING
The side height of the supports is set by changing
the position of the adjusting screw (A) on the
vertical tube of the side support.
WIDTH ADJUSTING
The width is set by loosening the screw (B) and
then the toothed wheel so released can be guided
into the desired position.
13
BRAKES
BRAKE SETTING
the two screws of
Brake settings are to be conducted
only by authorised individuals.
GB
INOVYS
12/2008
the track