Fracarro HEAD LINE SIG7280 Instructions D'emploi page 13

PAL B/G (mono)
H standard
L, D/K standard
I standard
N standard
NTSC standard
B/G standard
H standard
D/K standard
L standard
I standard
N standard
NTSC standard
B/G standard
N standard
H standard
I standard
D/K standard
L standard (AM)
NTSC standard
Output connectors
Output frequency range
Output channel
Output frequency step
Maximum output level (Tamb)
Level adjustment
Through loss
Return loss
Unweighted S/N ratio (stand alone)
C/N in band
C/N in N±3
C/N @ ±40MHz
Spurious rejection
Operating temperature
Back panel connections
Mains power
Power consumption
Conformity
The technical data are nominal values and refer to an operating temperature of 25° C.
SUB-CARRIERS FREQUENCY (MULTISTANDARD)
VISION/SOUND CARRIER POWER RATIO (TAMB)
SOUND MODULATION FOR 1KHZ 0,5VRMS
SIGNAL TO NOISE
5,5MHz ± 50KHz
5,5MHz ± 50KHz
6,5MHz ± 50KHz
6MHz ± 50KHz
4,5MHz ± 50KHz
4,5MHz ± 50KHz
13dB ± 3dB (Left), 20dB ± 3dB (Right)
12dB ± 3dB
12dB ± 3dB
9dB ± 3dB
14dB ± 3dB
9dB ± 3dB
11dB ± 3dB
45KHz ± 2KHz
32KHz ± 3KHz
42KHz ± 2KHz
42KHz ± 2KHz
46KHz ± 4KHz
80%
32KHz ± 3KHz
Type F female
47 - 862MHz
E2 - E69
250KHz
95dBµV
0 - 15dB (step 1dB programm.)
<1,5dB
>10dB
>50dB
>60dB
>66dB
>75dB
>60dB
-5 ÷ 45°C
230V~, RS485
220-240V~, 50-60Hz Switch mode power supply Class II
8W
EN50083-2, EN60065
13