Display Description; Initial Use Of Parent Unit; Initial Use Of Camera - Inanny NM288 Manuel D'utilisation

6.3 Display description

7. Initial use of parent unit

7.1 Initial use of camera

1. Place the camera on a level, firm surface and point the camera lens at the
area that you wish to monitor. Ensure that there are no other electrical
devices in the proximity of the camera.
WARNING
Do NOT position the camera within reach of the baby!
2. Connect the small end of the "Baby" camera mains part plug to the camera.
3. Connect the other end of the mains part plug to the socket.
4. Move the ON/OFF switch to "ON" to switch on the camera. The function light on the
camera begins to glow blue.
5. Push the ON/OFF switch downwards to switch off the camera.
Signal strength
Temperature display
*1
Alarm clock
*3
Infrared night vision
Lullaby
Intercom function
Alternating camera image
Camera number
Battery state
Energy-saving mode menu
Camera menu
Temperature menu
Alarm clock menu
Lullabies menu
Zoom menu
7