Initial Use Via Smartphone/Tablet; Setting Up The Camera Using An Android Device; Setting Up The Camera On Your Iphone/Ipad - Inanny NM288 Manuel D'utilisation

Alternating camera image
If you have multiple cameras registered, the "Alternating camera image"
function is available. When this function is activated, the transmission images
from the registered cameras appear on the screen in the form of a loop that
changes every 12 seconds. To activate this function, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
• Confirm using the ( OK ) button.
Energy-saving mode
The parent unit has an energy-saving mode. When you activate the
energy-saving mode, the screen switches off automatically after 5, 15 or 60
minutes, as you choose.
• Use the left/right direction arrows (
• Use the up/down direction arrows (
which the screen should switch off automatically (5 mins, 15 mins or 60 mins).
• Confirm using the ( OK ) button.

9. Initial use via smartphone/tablet

9.1 Setting up the camera using an Android device

• Open the Google Play Store on your Android device.
• Look up the app "iNanny Monitor" and download it. Start the app and create
a user account.
• Follow the further instructions in the app. As soon as the camera registration
has been successfully completed, the transmission image of the installed
camera appears.
• Position the camera (2m away from the baby, out of the reach of children).

9.2 Setting up the camera on your iPhone/iPad

• Open the App Store on your iPhone/iPad.
• Search for the "iNanny Monitor" app and download it.
• Start the app and create a user account.
• Follow the further instructions in the app. As soon as the camera registration
has been successfully completed, the transmission image of the installed
camera appears.
• Position the camera (2m away from the baby, out of the reach of children).
/ ) to select the menu item
/ ) to select the menu item
/ ) to select the menu item
/ ) to select the time period after
11
.
.
.