Other Setting Options; Resetting The Time And Date - Honeywell HR 40 Instructions De Montage Et D'utilisation

6. Confirm with the
The switching point is deleted.
7. End the procedure with the
– or –
In order to delete further switching points, repeat Steps 5 and 6.

Other setting options

Resetting the time and date

Note: The date and time are set at the factory. Should the batteries be empty
for an extended period (nothing in the display) or if it has taken too long to
change the batteries, you will need to reset the date and time.
1. Hold the
PROG
2. Set the year using the adjustment dial.
3. Confirm the selection with the
4. Set the month using the adjustment dial.
5. Confirm with the
6. Set the day using the adjustment dial.
7. Confirm with the
8. Set the hour using the adjustment dial.
9. Confirm with the
10. Set the minute using the adjustment dial.
11. Confirm with the
button.
PROG
AUTO
MANU
button down for 3 seconds.
PROG
button.
PROG
button.
PROG
button.
PROG
button.
PROG
button.
button.
39