Product Description; Scope Of Delivery; Packing; Sensor Designation - Mettler Toledo InPro 8600 Série Instructions D'utilisation

14

3 Product description

© 03 / 07 Mettler-Toledo GmbH, CH-8606 Greifensee
Printed in Switzerland
3.1

Scope of delivery

Standard supply of the sensor is made up of the following:
– one instruction manual
– certificates in accordance with the specifications
– blanking plate in black
On receipt of the shipment, check immediately:
– The sensor and accessories for any sign of transport damage. Report any damage
immediately to the carrier and to your supplier.
– The type designation on the sensor body.
– For completeness of the supply. Please notify your supplier immediately if the
shipment is incomplete or in any way incorrect.
Notice: A defective sensor must neither be installed nor put into service.
3.2

Packing

The packing consists of cardboard and foam plastic. Keep the packing for possible later use,
such as for storage or transport of the sensor. However, if you wish to dispose of the packing,
please observe your local regulations in this respect.
3.3

Sensor designation

Type designation
A sensor can be identified by the article number and the model name on the label located
on the sensor.
InPro 8600 / x / y
x: D = digital connection of the sensor with a transmitter Trb 8300 D
W= wireless connection of the sensor with a handheld (PDA) or a computer
y: 1 = single-angle version (25°)
2 = dual-angle version (25° and 90°)
Serial number
The serial number can be found on the label on the sensor.
Sensor certifications
The label located on the sensor provides the information about the sensor certifications.
InPro 8600/D/2
52 123 456
1.4404/316L EPDM FDA
PS: 16 bar TS: 120 ºC
SNR 6251234
4 6 5
Easy sensor identification due to the label
1
IS CL I,II,III, Div. 1
2
GR ABCDEFG / T6
II 1/2GD iiC T3 / T4 / T5 / T6
SNCH 03 ATEX 3590 X
3
see instruction manual
7
InPro 8600 Series
Legend:
1 Designation
2 Article number
3 Material specifications
4 Max. permissible pressure
5 Max. permissible temperature
6 Serial number
7 Sensor certification
InPro 8600 Serie
52 800 991