Dometic FRESHWELL FW3000 Notice D'utilisation page 26

Masquer les pouces Voir aussi pour FRESHWELL FW3000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 55
Troubleshooting
Problem
Cause
Water enters the
The condensation water drainage open-
vehicle
ings are clogged up.
The seals are damaged.
No supply voltage (230 Vw) connected. ➤ Check the power supply.
Under-bench air
conditioner does
The voltage is too low (under 200 Vw).
not switch on.
The voltage converter is defective.
The defective thermal protection is
defective.
The electrical fuse of the power supply is
too low.
Under-bench air
The air filter is obstructed.
conditioner stops
The voltage is too low (under 200 Vw).
working.
The voltage converter is defective.
The defective thermal protection is
defective.
The condenser fan is damaged.
The heat exchange coils are polluted.
The external blower is defective.
Under-bench air
One of the temperature sensors is
conditioner does
defective.
not switch off.
26
FreshWell3000
Remedy
➤ Clean the drainage openings for
condensation water.
➤ Contact an authorised workshop.
➤ Contact an authorised workshop.
➤ Check the electrical fuse of the
power supply.
➤ Clean the air filter.
➤ Contact an authorised workshop.
➤ Contact an authorised workshop.
EN

Publicité

Table des Matières
loading

Table des Matières