Cleaning The Appliance - Fiorenzato F5 Manuel D'instruction

tenance of parts subject to most wear and tear must
be carried out by specialized personnel. The grinding
blades require special attention in order to prevent
irregular overheating of the motor but, above all, to
continuously guarantee high quality ground coffee.

Cleaning the appliance

Before cleaning any part of the appliance, remove
the power supply cable from the socket. Never
use water jets to clean this appliance.
The appliance must not be installed near other
appliances that require the use of water jets.
The appliance must be cleaned regularly and only
by specialized personnel.
To retain the shine of details on the appliance, the
use of abrasive products is not recommended.
Instead, sanitized brushes or clean cloths are rec-
ommended for use.
The hopper
The hopper must be regularly cleaned. This opera-
tion must be carried out after having loosened the
appropriate anchoring screw. After cleaning, fasten
the hopper to the grinding blade holder again using
the same anchoring screw. It is advisable to use
water and neutral soap to clean the hopper. Then
rinse with warm water and dry carefully.
The grinding system
To clean the grinding unit, it is necessary to remove
the grinding adjustment ring nut, rotating it clock-
wise. The ring nut is fastened with a safety screw,
which must be previously removed. Then it is pos-
sible to remove the upper grinding blade holder
and carefully clean the entire grinding unit, includ-
ing the grinding blades and threads, using a brush
and a dry cloth. When cleaning operations have
ended, replace the upper grinding blade holder and
screw the grinding adjustment ring nut back on. Put
the anti-unscrewing screw back into one of the two
available holes, the one that allows the required
grinding adjustment. Replace the hopper, fastening
it with the special safety screw and then adjust the
grinding.
The doser unit
(for the grinder-doser version)
Cleaning can be done after removing any ground
coffee and carefully cleaning the doser stars with a
dry brush. Use the doser lever to help you.
The doser outlet hole can be cleaned with a dry
cloth. For more thorough cleaning, contact special-
ized personnel, who must always disconnect the
appliance from the electric supply socket.
The outlet
(Coffee grinder version with bag holder)
It is advisable to use a dry cloth to clean the coffee
outlet.
DIRECTIVE 2002/96EC (RAEE):
INFORMATION TO USERS
This information is addressed only to the owners
of sets bearing the (Fig. A) symbol on the
adhesive label with the technical data applied to
the product (serial number label):
This symbol means that, according to the current
regulations, this is an electrical or electronic unit
and complies with EU Directive 2002/96/EC
(RAEE) therefore, at the end of its life, it shall
have to be disposed of separately from domestic
waste delivering it freely to a recycling centre for
electrical and electronic appliances or returning it
to the retailer when you purchase a similar unit.
The user is responsible for delivering the unit to
the appropriate recycling centre or he/she will
incur the penalties provided for by the waste
regulations in force at the time.
The recycling centre will then decide whether the
unit has to be recycled, treated or disposed of,
limiting its effect on the environment and public
health. For more detailed information regarding
the available recycling centres, contact your local
waste department or the shop the unit was
purchased from. Manufacturers and importers
comply with their responsibility regarding
recycling, treatment or disposal both directly and
taking part into a collective system.
23
Fig. A