1. General information
1. General information
The duct temperature sensor described in the operating instructions has been manufactured
■
using state-of-the-art technology. All components are subject to stringent quality and
environmental criteria during production. Our management systems are certified to ISO 9001
GB
and ISO 14001.
These operating instructions contain important information on handling the instrument.
■
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regulations for
■
the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate vicinity of
■
the instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions prior to
■
beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the product
■
contrary to its intended use, non-compliance with these operating instructions, assignment of
insufficiently qualified skilled personnel or unauthorised modifications to the instrument.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious injury or death,
if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or damage
to equipment or the environment, if not avoided.
Information
... points out useful tips, recommendations and information for efficient and trouble-
free operation.
4
www.wika.de / www.wika.com
TE 67.16
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.com
WIKA operating instructions model TF40