AYA ATV4F/1 Instructions D'utilisation page 18

Warning!
All electrical work must be performed by a qualified electrician and uthorized.
No modification or intentional change in the dietelectrical may be carried out.
The unit is designed to connect three-phase alternating current with
(220-240V/50Hz). The connection diagram is located on the lid
of the junction box. Make sure the cable connection
corresponds to the type of connection and the rated power of the device.
Warning!
Remember to connect the safety circuit
to the connection box terminal marked
with .The electrictity supply for the
hob must have a safety switch which
enables the power to be cut off in case of
emergency.The distance between the
working contacts of the safety switch
must be at least 3 mm.Before connecting
the hob to the power supply it is
important to read the information on the
data plate and the connection diagram.
CONNECTION DIAGRAM
Caution!
Voltage of heating elements 220V～240V
For 230V earthed one-phase
connection,bridges connect 1-2-3
1
terminals and 4-5 terminals,safety
wire to
Energy Saving Tips
Do not install near refrigerators or freezers.
Otherwise the energy consumption increases unnecessarily.
PE terminal
15
2
1
Recommen-
ded
type
of connection
lead
H05RR-F
2
3x4 mm