Installation - AYA TCV4S1 Instructions D'utilisation

INSTALLATION

Important:
There must be a minimum distance of 100 mm between the edges of the cut
hole in the bench top and the adjoining cabinet walls and 65mm from rear wall
of cabinet .
Preparation
Remove any dust from the benchtop directly surrounding the cut hole to
ensure there is a clean surface.
Remove the protective paper film from the adhesive strip that is
secured to the bottom of the glass surface.
Position the cooktop into the hole in the benchtop and
press down firmly to ensure a secure fit to the benchtop.
3
2
1
65mm
100mm
1. Benchtop
2. Ceramic Cooktop
3. Adhesive Seal
15