AYA TCV4S1 Instructions D'utilisation page 19

Warning!
All electrical work must be performed by a qualified electrician and uthorized.
No modification or intentional change in the dietelectrical may be carried out.
The unit is designed to connect three-phase alternating current with
(220-240V/50Hz). The connection diagram is located on the lid
of the junction box. Make sure the cable connection
corresponds to the type of connection and the rated power of the device.
Warning!
Remember to connect the safety circuit
to the connection box terminal marked
with .The ele-ctrictity supply for the
oven must have a safety switch which
enables the power to be cut off in case of
emergency.The distance between the
working contacts of the safety switch
must be at least 3 mm.Before connecting
the oven to the power supply it is
important to read the informa-tion on the
data plate and the connection diagram.
CONNECTION DIAGRAM
Voltage of heating elements 220V～240V
Caution! In the event of any connection the
safetywire must be connected to the
～
For 220V
connection,bridges connect 1-2-3
1
terminals and 4-5 terminals,safety wire to
Caution!
240V earthed one-phase
Energy Saving Tips
Do not install near refrigerators or freezers.
Otherwise the energy consumption increases unnecessarily.
PE terminal.
16
2
1
1
2
3
5
4
1 2 3
L1
5 4
PE N