Initial Operation; Inserting Batteries; Configuring The Unit - TESTO 104 Mode D'emploi

6. Initial Operation

6.1 Inserting batteries

6.2 Configuring the unit

6.3 Labelling the instrument
The testo 104 can be labelled using coloured foils. The coloured
label can be used, for example, to allocate the instrument to a
particular processing stage or employee.
1 Loosen the screw on the battery
compartment.
2 Open the battery compartment.
3 Insert batteries (2 x AAA).
Observe the polarity!
4 Close the battery compartment.
5 Tighten the screw.
1 Loosen the screw on the battery
compartment.
2 Open the battery compartment.
3 Set the switch (e.g. using a sharp
instrument) to the desired temperature
unit (°C/°F/°R).
4 Close the battery compartment.
5 Tighten the screw.
1 Open the battery compartment.
2 Open the flap on the inside of the
battery compartment.
3 Stick the coloured foil onto the flap.
4 Close the flap.
5 Close the battery compartment.
6. Initial Operation
11 11