Scope Of Delivery; Operating Elements - VOLTCRAFT RGB-2000 Notice D'emploi

The unauthorized conversion and/or modification of the product is inadmissible for reasons of safety and
approval (CE).
Measuring instruments and accessories are not toys and have no place in the hands of children.
On industrial sites the accident prevention regulations of the association of the industrial workers' society for
electrical equipment and utilities must be followed.
In schools, training centres, computer and self-help workshops, handling of measuring instruments must be
supervised by trained personnel in a responsible manner.
Do not switch the measuring instrument on immediately after it has been taken from a cold to a warm environ-
ment. The condensation that forms might destroy your device. Allow the device to reach room temperature
before switching it on.
Do not leave packaging material laying around carelessly. These may become dangerous playing material for
children.
You should also heed the safety instructions in each chapter of these instructions.
Contents
Colour Analysis Device RGB-2000
External measuring sensor
Calibration card white
Plastic case
Operating instructions

Operating elements

(see fold-out page)
1 button RGB/HSL switching
2 „CAL" calibration button
3 „POWER" switch to turn the device on/off
4 „TEST" measuring button (identical with (16))
5 LCD display
6 Measuring connection for external sensor (17)
7 „Function" button
8 „REL" button for comparison measurements
9 „LIGHT ON/OFF" button for measuring light
10 Tripod socket
11 RS232 interface
12 Power pack connection socket
13 Mounting bracket
14 Battery compartment on the rear
15 Measuring opening with 45° LED illumination
16 Measuring button (identical with (4))
17 Sensor connection plug
17