Intended Use; Safety Instructions - VOLTCRAFT RGB-2000 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Intended Use

The colour analysis device RGB-2000 is a digital measuring device for optical colour determination and objec-
tive quality control. The measuring device is equipped with an external measuring sensor with 45°/0° colour
measuring geometry and integrated LED illumination unit. The colour measuring device serves mainly to mea-
sure nonluminous materials like textiles, paper, leather, colour prints, etc. The integrated illumination unit can
be switched off and also used for comparison measuring of self-illuminating surfaces like CRT picture tubes,
LCD monitors or cold illuminants (e.g. LEDs). The colour space can be displayed in RGB values from 0 - 1023
or HSL values from 0 - 1000.
Via the relative function, it is possible to perform a fast comparison measurement of references and samples.
An RS-232 interface allows the further processing of the measuring data with an optional data cable.
A 9 V block battery (type 1604A) is required for operation. Operation with a power pack unit is also possible.
Measurements must not be carried out under unfavourable ambient conditions.
Unfavourable ambient conditions are:
- Wetness or high air humidity
- Dust and flammable gases, vapours or solvents
- Hot illumination sources.
Any use other than described above is not allowed and can damage the product.
No part of the product may be modified or rebuilt!
Observe the safety instructions under all circumstances!

Safety instructions

Please read all the instructions before using this device, they include important infor-
mation on its correct operation.
The warranty will be void for damage arising from non-compliance with these operating
instructions. Liability for any and all consequential damage is excluded!
Nor do we assume liability for damage to property or personal injury caused by improper use or the failure to
observe the safety instructions! The warranty is voided in these cases.
This device left the manufacture's factory in a safe and perfect condition.
We kindly request that you as a user observe the safety instructions and warnings contained in this operating
manual to preserve this condition and to ensure safe operation! Please pay attention to the following symbols:
An exclamation mark in a triangle indicates important information in these operating instruc-
tions which are to be followed strictly.
This product has been CE-tested and meets the necessary European guidelines.
The "hand" symbol indicates special information and advice on operation of the device.
16

Publicité

Table des Matières
loading

Table des Matières