Previous Model Ethernet (Lan)+Usb Interface Board - Citizen CT-S251 Mode D'emploi

3.5 Previous Model Ethernet (LAN)+USB
Interface Board
This section provides an overview of the previous model Ethernet (LAN) interface
board. For details about this board, refer to the separate manual.
Panel button operation
Board operations are performed using the panel button on the Ethernet board. You
can use the button to print setup information.
 Printing network setup information
Press the panel button.
 Returning to factory settings
Hold down the panel button. A buzzer* will sound and then hold down the panel
button again within 3 seconds. This returns network settings to its factory settings.
* Depending on settings, the buzzer may not sound.
CAUTION
 The board will automatically restart after this operation is complete.
 If settings are configured to obtain an IP address from a DHCP server automatically, the
new IP address may be different from the previous one.
Panel button
— 26 —