Feed Button - Citizen CT-S251 Mode D'emploi

 FEED button
Press this button to feed paper.
In case of a cutter lock, remove the cause of the lock, close the paper cover, and
then press the FEED button.
The printer enters the mode for setting memory switches and running self test.
Operation panel
The operation panel has five LEDs and two buttons.
LED name
POWER LED
PAPER LED
CUTTER LED
COVER LED
SERVICE LED
Refer to 5.3 Manual Setting of Memory Switches
Color
Green Lights when the power is on, turns off when the power is off.
Green Lights or flashes when no paper or low paper is detected.
May also light or flash when other abnormalities are detected.
Green Flashes when a cutter error is detected.
May also light or flash when other abnormalities are detected.
Green Lights or flashes when an open paper cover is detected.
May also light or flash when other abnormalities are detected.
Orange Flashes when an unrecoverable printer abnormality is
detected.
— 13 —
Refer to 4.3 Self Test
Description
Refer to 4.5 Error Indications