Troubleshooting; Disposal - Dometic COOLFUN SC26 Notice D'utilisation

Troubleshooting

9 Troubleshooting
Problem
Your device is not work-
ing (plug is inserted).
When operating from
the DC socket:
The ignition is on and the
cooler is not working.
10

Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
16
Possible cause
There is no voltage
flowing in the DC socket
in your vehicle.
No voltage present in
the AC voltage socket.
The inner fan or the
cooling element is
defective.
The fuse of the DC plug
is dirty. This results in a
poor electrical contact.
The fuse of the DC plug
has blown.
The vehicle fuse has
blown.
CoolFun SC26, SCT26, SC30, SC38
Suggested remedy
The ignition must be switched on in
most vehicles to apply current to the
DC socket.
Try using another plug socket.
This can only be repaired by an
authorised repair centre.
If the plug of your cooler becomes
very warm in the DC socket fitting,
either the fitting must be cleaned or
the plug has not been assembled
correctly.
Replace the fuse (fig. 6 1, page 5)
of the DC plug with one of the same
rating.
Replace the vehicle's DC socket fuse
(usually 15 A). Please refer to the
operating manual of your vehicle.
EN