Product Description And Specifications - Bosch PML LI Notice Originale

OBJ_BUCH-1197-003.book Page 9 Tuesday, May 29, 2012 9:11 AM
Handle the cordless worklight with care. The cordless
worklight generates intense heat, which leads to increased
danger of fire and explosion.
Do not work with the cordless worklight in hazardous
areas.
Do not continue to press the On/Off switch after the
cordless worklight has been automatically switched
off. The battery can be damaged.
Do not direct the light beam at persons or animals and
do not stare into the light beam yourself (not even from
a distance).
Use only original Bosch accessories.
Do not cover off the lamp head while operating the
cordless worklight. The lamp head heats up during oper-
ation and can cause burns when the heat accumulates.
Do not use the cordless worklight in road traffic. The
cordless worklight is not approved for illumination in road
traffic.
CAUTION! Do not stare into the light beam
for longer periods. The optical radiation can
be harmful for your eyes.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e.g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
When battery pack is not in use, keep it away from oth-
er metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritations or burns.
In case of damage and improper use of the battery, va-
pours may be emitted. Provide for fresh air and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
Use the battery only together with your Bosch product.
This is the only way to protect the battery against danger-
ous overload.
Use cordless worklight only with specifically designat-
ed battery packs. Use of any other battery packs may cre-
ate a risk of injury and fire.
Use only original Bosch 14.4 V and 18 V lithium ion bat-
teries. When using other batteries, e.g. imitations, recon-
ditioned batteries or other brands, there is danger of injury
as well as property damage through exploding batteries.
Bosch Power Tools
Product Description and
Specifications
Product Features
The numbering of the product features refers to the illustra-
tion of the cordless worklight on the graphics page.
1 Lamp head
2 Flexible neck
3 Connection cable
4 Fastener with guide for cable and Velcro strap
5 Head strap
6 Universal adapter
7 Velcro strap (2x)
8 Pipe clamp
9 Protective pouch
10 Operation and charge-control indicator
11 On/Off switch
12 Battery adapter
13 Lens plate
14 Battery, 14.4 V (Li-ion) or 18 V (Li-ion)*
15 Battery unlocking button*
16 Release lever
17 Rubber ring (2x)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Cordless Worklight
Article number
1)
Rated voltage
1)
Lighting duration, approx.
Operating temperature
2)
Weight
1) Depends on the battery pack (1.3/1.5 Ah) being used
2) Battery adapter, flexible neck and lamp head
Assembly
Battery Insertion/Removal (see figure A)
Inserting the Battery
Use only original Bosch lithium ion batteries with the
voltage listed on the nameplate of your cordless work-
light. Using other batteries can lead to injuries and pose a
fire hazard.
Insert a charged battery 14 into the battery adapter 12. Take
care to insert the battery in the right position, and that the
battery unlocking button 15 can be felt to engage in the bat-
tery adapter 12.
Removing the Battery
To remove the battery 14, press the battery unlocking button
15 and pull the battery toward the rear out of the cordless
worklight. Do not exert any force when doing this.
English | 9
PML LI
3 603 J74 300
V= 14.4/18.0
h 4.0/6.5
°C –10...+40
g 250
1 609 929 W51 | (29.5.12)