Product Description And Specifications; Technical Data - Bosch GLI PortaLED Professional 102 Notice Originale

OBJ_BUCH-1497-002.book Page 10 Monday, November 14, 2011 10:47 AM
10 | English
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritations or burns.
In case of damage and improper use of the battery, va-
pours may be emitted. Provide for fresh air and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
Use the battery only in conjunction with your Bosch
cordless worklight. This measure alone protects the bat-
tery against dangerous overload.
Use only original Bosch batteries with the voltage list-
ed on the nameplate of your cordless worklight. When
using other batteries, e. g. imitations, reconditioned bat-
teries or other brands, there is danger of injury as well as
property damage through exploding batteries.
Product Description and Specifica-
tions
Intended Use
The cordless worklight is intended for hand-guided illumina-
tion with regard to space within dry areas.
Product Features
The numbering of the product features refers to the illustra-
tion of the cordless worklight on the graphics page.
1 On/Off switch
2 Lens plate
3 Heat sink
4 Battery unlocking button*
5 Battery*
6 Support bracket for adjustment of the illumination angle
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
1 619 929 J08 | (14.11.11)

Technical Data

Cordless Worklight GLI PortaLED 102 | 136 | 238
Article number
Rated voltage V=
Lighting duration
(approx.) for battery
capacity
– 1.3 Ah min
– 2.6 Ah min
– 3.0 Ah min
Operating temperature °C – 10 ... +40 – 10 ... +40
Storage temperature °C – 15 ... +50 – 15 ... +50
Weight according to
EPTA-Procedure
01/2003
– 3 601 D46 0.. kg
– 3 601 D46 1.. kg
– 3 601 D46 2.. kg
Please observe the article number on the type plate of your cordless
worklight. The trade names of the individual cordless worklights may
vary.
Assembly
Battery Charging (Accessory) (see figure A)
Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium ion battery of your cordless worklight.
Note: The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The Lithium-Ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium ion battery is protected against deep discharging
by the "Electronic Cell Protection (ECP)". When the battery is
empty, the cordless worklight is switched off by means of a
protective circuit.
Do not continue to press the On/Off switch after the
cordless worklight has been automatically switched
off. The battery can be damaged.
To remove the battery 5, press the battery unlocking button 4
and pull the battery upward out of the battery port. Do not ex-
ert any force when doing this.
The battery is equipped with a NTC temperature control
which allows charging only within a temperature range of be-
tween 0 °C and 45 °C. A long battery service life is achieved
in this manner.
Observe the notes for disposal.
Professional
3 601 D46 ...
14.4 18
75 90
150 180
170 210
3.7 3.7
3.9 3.9
4.3 4.3
Bosch Power Tools