EXIT Toys JumpArenA 244 Mode D'emploi page 17

STEP 5
Lay the frame Pad (9) on the frame.
Adjust the position of the Frame Pad
so that the slits are directly above the
Socket, as shown.
Caution: Do not use the trampo-
line without the Frame Pad (9).
The Frame Pad is designed to
reduce the possibility of injuries
due to jumpers coming in contact
with the trampoline frame. If you
do not have a Frame Pad, contact
your dealer to obtain one. Prop-
erly install the Frame Pad before
using the trampoline.
STEP 6
Look underneath the trampoline.
Locate the straps attached to the
underside of the frame pad. Position
each outer strap so that one strap is
on each side of the frame as shown.
Tie the outside straps sewn to the
Pad Joints to each side of the frame
as shown and attach the inner straps
to the near V-rings.
Repeat this step with the remaining
straps (not shown).
Notice: If you purchase the en-
closure please attach the mat and
the net together before attach-
ing the strap to the frame and
V-rings.
Using the included plastic tie, attach
the warning label (11) to the frame
near the point where jumpers will
climb onto and off the trampoline.
JumpArenA
5
9
Socket
6
Frame
Outer Straps
Frame
Trampolines
Slit
Inner Straps
V-ring
11
17