Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION MANUAL
DIGIWAY PLUS
Advanced Setting
16)
16)
Display
M / S
M / S
o o
Master /
Master /
Opening
Opening
Slave
Slave
Advanced Setting
17)
17)
Approach speed
Advanced Setting
18)
18)
Obst. detection %
Advanced Setting
19)
19)
Closing delay
If the operator is used for disabled access [ in compliance with the Regulations EN12650-1, EN 12650-2 ] , adjust the opening and
If the operator is used for disabled access [ in compliance with the Regulations EN12650-1, EN 12650-2 ] , adjust the opening and
closing speed of the door to obtain the following travel times
closing speed of the door to obtain the following travel times
According to the Regulation, with the option DISABLE MODE [see. Menu Confi guration] set on ENABLE, the minimum Pause time is
According to the Regulation, with the option DISABLE MODE [see. Menu Confi guration] set on ENABLE, the minimum Pause time is
stated at 5 Sec. Adjust the motor torque using the features of the Main Functions menu to get the value of 67 N, measured at 25 mm from
stated at 5 Sec. Adjust the motor torque using the features of the Main Functions menu to get the value of 67 N, measured at 25 mm from
the main edge of the leaf. Check the min slowing down time during the closing ( last 10°) which must be 1,5 sec. If the value found is
the main edge of the leaf. Check the min slowing down time during the closing ( last 10°) which must be 1,5 sec. If the value found is
different, act on the Closing Speed parameter.
different, act on the Closing Speed parameter.
Warning : Disabled access doors must be identifi ed with proper indications.
Warning : Disabled access doors must be identifi ed with proper indications.
Display Mode is
Expert / Normal
LEGEND
LEGEND DISPLAY EXPERT MODE
O O
c c
C C
B B
Open
Open
Closing
Closing
Closed
Closed
Obstacle
Obstacle
MoOcCBXbsMiIUJ
P=-000.0 V=-00.0
Position (+/-)
Position (+/-)
P P
Approach speed
2
|||||||||||||||||......................
Obst. detection %
2
|||||||||||||||||......................
Closing delay
0 SEC
|||||||||||||||||......................
Disabled access settings
Disabled access settings
Door lenght
Door lenght
750 mm
750 mm
850 mm
850 mm
1000 mm
1000 mm
1200 mm
1200 mm
It's possible to change the information displayed on the LCD setting to NORMAL or
It's possible to change the information displayed on the LCD setting to NORMAL or
EXPERT mode.
EXPERT mode.
In EXPERT Mode all the main parameters of the motion will be displayed according to
In EXPERT Mode all the main parameters of the motion will be displayed according to
the following diagram:
the following diagram:
DISPLAY EXPERT MODE
1,2,3,4, f
1,2,3,4, f
b b
s s
M M
Obstacle
Obstacle
restart for
restart for
Stop
Stop
Motor
Motor
type
type
obstacle
obstacle
Speed: rpm/10
Speed: rpm/10
V V
It's possible to change the approach speed during the fi nal closing.
It's possible to change the approach speed during the fi nal closing.
This can be usefull if the door fi nds some friction in the last approaching motion where is
This can be usefull if the door fi nds some friction in the last approaching motion where is
searching for the close position.
searching for the close position.
Default value = 3.
Default value = 3.
It's possible to change the percentage of the complete
It's possible to change the percentage of the complete door
doesn't detects an obstacle but assign the stop to the close position.
doesn't detects an obstacle but assign the stop to the close position.
Default value = 2%
Default value = 2%
It's possible to insert a delay at the end of closing ( Closing delay ) before the Open Door
It's possible to insert a delay at the end of closing ( Closing delay ) before the Open Door
relay change status.
relay change status. Default value = 0 Sec.
Default value = 0 Sec.
MOTOR
MOTOR
EX POWER
EX POWER
CLOSE
CLOSE
OPEN DOOR
OPEN DOOR
RELAY
RELAY
Door weight
Door weight
50 Kg
50 Kg
60 Kg
60 Kg
70 Kg
70 Kg
3,0 s
3,0 s
3,1 s
3,1 s
3,2 s
3,2 s
3,1 s
3,1 s
3,1 s
3,1 s
3,2 s
3,2 s
3,2 s
3,2 s
3,4 s
3,4 s
3,7 s
3,7 s
3,8 s
3,8 s
4,2 s
4,2 s
4,5 s
4,5 s
i i
I I
U U
J/E
J/E
Opening
Opening
Closing
Closing
Elec-
Elec-
Opening
Opening
current
current
current
current
trolock
trolock
Jolt
Jolt
door trip after which the door
trip after which the door
Closing
Closing
Delay
Delay
80 Kg
80 Kg
90 Kg
90 Kg
3,3 s
3,3 s
3,5 s
3,5 s
3,4 s
3,4 s
3,6 s
3,6 s
4,0 s
4,0 s
4,2 s
4,2 s
4,8 s
4,8 s
5,1 s
5,1 s
cdvigroup.com
EN
cdvi.com
19
Publicité
Table des Matières
