Keyboard.
Keyboard support.
Antenna
connection base.
Power connection ~230/240V – 50Hz
Thermostat connection.
Room probe.
Screw the Wi-Fi antenna to the docking station. This magnet base must be stuck to the back of the boiler.
Once assembled, the unit has to remain in a vertical position.
Antenna.
Magnet connection base.
Place the magnet connection base with the antenna where appropriate. When possible, avoid the presence
of metal sheets around the antenna as the WiFi signal might be distorted.
WiFi upper view.
5.
CLEANING AND MAINTENANCE.
To ensure the correct operation of your stove, the following Cleaning and maintenance operations are
necessary at the indicated frequency. The stove must always be cold.
The deterioration of the stove parts by a lack of cleaning involves the loss of the two-year warranty offered
by NETFLAME (see warranty section).
WiFi plan view with no metal objects around.
30
Drawing 9
Drawing 10