Fast Start Quick Reference Guide; Spraying Instructions; Cleaning Instructions - Earlex Super Finish Max Mode D'emploi

FAST START QUICK REFERENCE GUIDE

This is only a quick reference.
Read the entire instruction manual prior to using the product.
SKIN INJECTION HAZARD RISK OF EXPLOSION OR FIRE HAZARDOUS VAPORS
Read all warnings and safety instructions in the owner's manual before use.

SPRAYING INSTRUCTIONS

1
1. Thin material as necessary.
(See page 5.) Remove and fill
container with material. Use a
filter to strain material if it is
old.
5
5. Attach container to sprayer.
9
HAZARDOUS VAPORS
9. Spray surface, keeping
sprayer level. Use a sweeping
and overlapping motion.
ENGLISH
2
2. Determine size of tip and
needle you will need by
referring to chart on page 5.
6
See manual for grounding
instructions
6. Plug sprayer into outlet.

CLEANING INSTRUCTIONS

1
1. Unplug sprayer, remove
container, and empty
contents.
3
Black
Yellow
3. Select the proper Air Cap.
Black: Fine spray pattern.
Yellow: Wide spray pattern
7
7. Adjust spray pattern to
horizontal, vertical, or cone.
(See page 7.)
2
2. Fill sprayer with cleaning
solution, plug in sprayer, and
operate trigger until solution
comes through nozzle. Do not
submerge in liquid.
4
4
4. Insert the pick-up tube into
the cylinder housing. See
Page 6, Figure B to determine
orientation of pick-up tube.
8
8. (–) Turn counter clockwise
for less flow and finer spray
pattern. (+) Turn clockwise for
more flow and larger spray
pattern.
3
3. Remove parts. Clean and
dry thoroughly according to
Step Two of the Clean Up
instructions. (See page 8.)