Commissioning Of The Device - SC iStick Pico 21700 Manuel D'utilisateur

SC ISTICK PICO 21700 – COMMISSIONING OF THE DEVICE
Operating Instructions
Fully charge the necessary and replaceable 21700 or 18650 battery before first use� Please take note of the positive
and negative poles in the battery compartment� Ensure that there is no visible damage to the surface of the
battery cells� The device has a 510-pin connection with a spring-loaded connector, making it suitable for a variety
of sub-ohm-capable clearomizers�
Notes on cleaning
Use a dry cloth or a cotton swab to clean the device�
Battery Sleeve
How to install the Battery
Open the battery compartment on top of the device� Place charged 21700 or
18650 battery in the device according to the poles indicated� Close the battery
compartment� If you want to operate the device with a 18650 cell, please use
the appropriate battery sleeve� The sleeve is part of the set�
Note: If the display does not light up after switching the device on, make sure
that you have inserted the batteries correctly and that they have sufficient
power� If the device still cannot be switched on despite fulfilling all the afore-
mentioned prerequisites, please contact our customer service department�
55