Features; Product Specifications; Assembly - Ryobi PSBCS02 Manuel D'utilisation

PRODUCT SPECIFICATIONS

Cutting Wheel Diameter ............................................... 3 in.
Max Cutting Depth .................................................. 0.62 in.
Arbor Size .................................................3/8 in. or 7/16 in.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to the
product by the manufacturer and require customer instal-
lation. Use of a product that may have been improperly
assembled could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.

FEATURES

Rated Speed ......................................... 20,000 /min (RPM)
Maximum Wheel Thickness ................................... 7/64 in.
Wheel Type .....................................Diamond and Abrasive

ASSEMBLY

SELECTING CUTTING WHEEL
Selecting the correct type of wheel is important in order to
obtain the best performance from the tool. Select the wheel
based on the application and on the material you wish to
cut. Selecting the right wheel will give you a smoother, faster
cut and prolong the life of the wheel.
Always carefully select and use cutting wheels that are rec-
ommended for the material being cut. Make sure that the
minimum operating speed of any accessory wheel selected
is 20,100 /min. or more.
WARNING:
Never use grinding wheels of any kind with this tool. Use
of non-cutting wheels can result in property damage or
serious personal injury.
INSTALLING THE SHOE ASSEMBLY
See Figure 1, page 13.
 Remove the battery pack from the tool.
 Loosen the knob completely and remove the clamp.
 Place the shoe on the back of the wheel guard as shown.
 Align the threaded hole on the wheel guard with the screw
in the clamp.
 Place the clamp onto the wheel guard and tighten the
knob to secure in place.
To remove:
 Remove the battery pack from the tool.
 Loosen the knob completely and remove the clamp.
 Lift the shoe up and away from the wheel guard.
 Replace the clamp and knob.
7 - English