Bosch GLM 30 Professional Notice Originale page 19

Digital laser measure
Laser type
Approx. laser beam diameter (at 25 °C)
– 10 m distance
– 30 m distance
Automatic switch-off after approx.
– Laser
– Measuring tool (without measure-
ment)
Weight according to EPTA-Procedure
01:2014
Dimensions
Protection rating
Batteries
Rechargeable batteries
Individual measurements per set of
batteries
Unit of measurement setting
Sound setting
A) For measurements from the rear edge of the measuring tool, applies to high reflectivity of the
target (e.g. a white-painted wall), weak backlighting and 25 °C operating temperature. In addi-
tion, a deviation influence of ± 0.05 mm/m needs to be taken into account.
B) For measurements from the rear edge of the measuring tool, applies to low reflectivity of the tar-
get (e.g. black cardboard), strong backlighting and -10 °C to +45 °C operating temperature. In
addition, a deviation influence of ± 0.15 mm/m needs to be taken into account.
C) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by
condensation is expected.
D) The width of the laser line depends on the surface characteristics and on the ambient condi-
tions.
E) Except battery compartment
The serial number (5) on the type plate is used to clearly identify your measuring tool.
Bosch Power Tools
GLM 30
635 nm, < 1 mW
D)
9 mm
D)
27 mm
20 s
5 min
0.09 kg
105 x 41 x 24 mm
IP 54 (dust and splash- IP 54 (dust and splash-
E)
proof)
2 x 1.5 V LR03 (AAA)
2 x 1.2 V HR03 (AAA)
5000
–
●
1 609 92A 5DZ | (29.01.2020)
English | 19
GLM 30
635 nm, < 1 mW
D)
9 mm
D)
27 mm
20 s
5 min
0.09 kg
105 x 41 x 24 mm
E)
proof)
2 x 1.5 V LR03 (AAA)
2 x 1.2 V HR03 (AAA)
5000
●
–