Boiler Fixing; Probe-Electrode Positioning - Riello Gulliver BS1 Manuel D'entretien

3.2 BOILER FIXING

Widen, if necessary, the insulating gasket holes (3, fig. 3).
Fix the flange (5) to the boiler door (1) using four screws (4) and (if necessary) the nuts (2) interposing
the insulating gasket (3) but keep unloosing one of the two upper screws (4) (see fig. 2).
Put on the flange (5) the burner combustion head, tighten the flange with the screws (6) and lock the
loose screw (4).
N.B.: The burner can be fixed with the variable dimension (A) (see fig. 4). Anyway, make sure that the
combustion head crosses completely the boiler door thickness.
Fig. 2
3.3

PROBE-ELECTRODE POSITIONING

ATTENTION
Ensure that the plate (3, fig. 5) is always inserted
in the flattening of the electrode.
Lean the probe insulator (4) against the cup (2).
912T1
TYPE 911T1
17
A
2146
S7002
913T1 914T1
30 31 31
TYPE A
911 T1 116 - 70
912 T1 114 - 100
913 T1 128 - 110
914 T1 167.5 - 145
3.5
±
0.3
3
5 GB
Fig. 3
D5012
A
Fig. 4
D5011
Fig. 5
2
A
±
0.3
1
4
D6088