Installation; Working Position - Riello Gulliver BS1 Manuel D'entretien

CORRELATION BETWEEN GAS PRESSURE AND BURNER OUTPUT
To obtain the maximum output, a gas head pressure of 9.3 mbar, relatively to 912T1 model, is measured
(M2, see chapter 3.6, page 6) with the combustion chamber at 0 mbar using gas G20 with a net heat value of
3
10 kWh/m (8.570 kcal/m
10
8
6
4
2
0
0
0
3.

INSTALLATION

THE BURNER MUST BE INSTALLED IN CONFORMITY WITH LEGISLATION AND LOCAL STANDARDS.
3.1

WORKING POSITION

The burner is designed for operation in position 1 only.
Installation in positions 2, 3, 6 and 7 is not recommended as it is likely to hinder the unit's proper operation since
air damper closure cannot be guaranteed when the burner is on standby.
Installation in position 5 is only possible using the "MULTIBLOC rotation kit", to be ordered separately.
Installation 4 is prohibited as safety is compromised.
1
5
2146
3
).
50
100
50,000
2
6
150
150,000
100,000
3
7
4 GB
250
200
200,000 kcal/h
Thermal power
4
D4450
kW
D5207