Transportation And Storage; Inspect The Delivery; Transportation Guidelines; Storage Guidelines - Lowara ecocirc XL Manuel D'installation, D'utilisation Et D'entretien

MONTECCHIO MAGGIORE, 02.09.2013
AMEDEO VALENTE
(DIRECTOR OF ENGINEERING AND R&D)
rev.00
Lowara is a trademark of Lowara srl Unipersonale,
subsidiary of Xylem Inc.

2 Transportation and Storage

2.1 Inspect the delivery

1. Check the outside of the package.
2. Notify our distributor within eight days of the
delivery date, if the product bears visible signs
of damage.
3. Remove the staples and open the carton.
4. Remove the securing screws or the straps from
the wooden base (if any).
5. Remove packing materials from the product.
Dispose of all packing materials in accordance
with local regulations.
6. Inspect the product to determine if any parts
have been damaged or are missing.
7. Contact the seller if anything is out of order.

2.2 Transportation guidelines

Precautions
WARNING:
• Observe accident prevention regu-
lations in force.
• Crush hazard. The unit and the com-
ponents can be heavy. Use proper
lifting methods and wear steel-toed
shoes at all times.
Check the gross weight that is indicated on the
package in order to select proper lifting equip-
ment.
Position and fastening
The unit can be transported only in vertical position
as indicated on the package. Make sure that the
unit is securely fastened during transportation and
cannot roll or fall over. The product must be trans-
ported at an ambient temperature from -40°C to
70°C (-40°F to 158°F) with humidity <95% and pro-
tected against dirt, heat source, and mechanical
damage.

2.3 Storage guidelines

2.3.1 Storage location
NOTICE:
• Protect the product against humidity, dirt, heat
sources, and mechanical damage.
• The product must be stored at an ambient tem-
perature from -25°C to 55°C (-13°F to 131°F)
and humidity < 95%.

3 Product Description

3.1 Pump design

en - Translation of the original instructions
The pump is a wet rotor circulation pump with en-
ergy-efficient electronically commutated perma-
nent magnet technology, ECM technology. The
pump does not require a release/ventilation screw.
Intended use
The pump is suitable for:
• Domestic hot water (only for bronze pump
housing models)
• Hot water heating systems
• Cooling and cold water systems
The pump can also be used for:
• Solar systems
• Geothermal systems
Improper use
DANGER:
Do not use this pump to handle flam-
mable and/or explosive liquids.
WARNING:
Improper use of the pump may create
dangerous conditions and cause per-
sonal injury and damage to property.
NOTICE:
Do not use this pump to handle liquids containing
abrasive, solid, or fibrous substances, toxic or cor-
rosive liquids, potable liquids other than water, or
liquids not compatible with the pump construction
material.
An improper use of the product leads to the loss of
the warranty.
3.2 Product denomination
Example: ecocirc XLplus D 40-100 F
ecocirc XL
plus
D
40
-100
F

3.3 Technical data

high efficiency pump
series
with communication ca-
pabilities
Pump type:
"empty" = single pump
D = twin pump
B = bronze pump hous-
ing for domestic hot wa-
ter pumping
Flange connection nom-
inal diameter
Maximum head of the
pump -100 = 10m
Flange type:
F = Flanged
"empty" = Threaded
17