Teka JZC Série Manuel D'utilisation page 58

The time for pan detection is 3 minutes. If a pan is
not placed within this time period, or the pan is
unsuitable, the cooking zone shuts off.
With the Block Function, you can block the other
sensors, except for the on/off sensor
order to avoid undesired operations. This function
is useful as a childproof safety.
To activate this function, touch sensor
at least one second. Once you have done so, the
pilot turns on indicating that the control panel
is blocked. To deactivate the function, simply touch
sensor again.
If the on/off sensor
appliance while the block function is activated, it
won't be possible to turn the cooktop on again until
it unblocks.
When the hob is on, if one presses the touch key
and the locking touch key
simultaneously for three seconds, the beep that
accompanies each action will be deactivated.
The time indicator (12) will display "OF".
This deactivation will not be applied to all the
functions, as for example the beep for on/off, the
ending of the timer or the locking/unlocking of the
touch keys always remain activated.
To once again activate all the beeps that
accompany each action, again simultaneously
press the touch key and the locking touch key
(1) is used to turn off the
pilot (9) lights up and the power indicators will
show the symbol
paused.
in
Touch Stop&Go sensor
turns off and cooking resumes under the same
power and timer settings that were established
for
before the pause.
This function supplies "extra" power to the plate,
above the nominal value. Said power depends on
the size of the plate with the possibility of reaching
the maximum value permitted by the generator.
On activating the Power function in one hotplate, it
is possible that the performance of some of the
others may be affected, reducing its power to a
lower level, in which case this will be displayed on
its indicator (3).
(8) for one second. The
to indicate cooking has been
(8) again. The pilot (9)