Setting The Time; Setting The Date; Setting The Alarm Clock - Makita DMR300 Manuel D'instruction

4.
Rotate the Tuning control knob
<12 HOUR> or <24 HOUR> format. Press the Tuning
control knob to confirm your choice.
NOTE: If the 12 hour clock format is chosen, the radio
will then use the 12 hour clock for the setting.
5.
Press and hold the Menu/Info button
the menu setting.
6. Rotate the Tuning control knob
appears on the display and press the Tuning control
knob to enter the setting.
7. Rotate the Tuning control knob
FORMAT> appears on the display and press the control
knob to enter the setting.
8. Rotate the Tuning control knob
desired date format (<DD/MM/YYYY> or <MM/DD/
YYYY>). Press the Tuning control knob
your choice.

Setting the time

1. Press and hold the Menu/Info button
2. Rotate the Tuning control knob
appears on the display. Press the Tuning control
knob to enter the setting.
3.
Press the Tuning control knob
TIME> appears on the display to enter the setting.
4. The hour setting on the display will begin flashing.
Rotate the Tuning control knob
hour, and press the Tuning control knob
the setting. Then rotate the Tuning control knob
select the desired minute, and press the Tuning control
knob to confirm the setting.

Setting the date

1.
Press and hold the Menu/Info button
2.
Rotate the Tuning control knob
appears on the display. Press the Tuning control
knob to enter the setting.
3. Rotate the Tuning control knob
DATE> appears on the display. Press the Tuning control
knob to enter the setting.
4. Rotate the Tuning control knob
desired year and press the Tuning control knob
confirm the setting. Then rotate the Tuning control
knob to select the desired month, and press the
Tuning control knob
rotate the Tuning control knob
date and press the Tuning control knob
the setting.
to select either
INFO
MENU
until <TIME>
until <DATE
to select the
to confirm
.
INFO
MENU
until <TIME>
while <SET
to select the desired
to confirm
.
INFO
MENU
until <TIME>
until <SET
to select the
to confirm the setting. Then
to select the desired
to confirm

Setting the alarm clock

Your radio has two alarms which can each be set to wake
you to AM/FM radio or buzzer alarm. The alarms may be
set while the unit is in standby mode or while playing.
Setting radio alarm time
to enter
1.
Press and hold the radio alarm button
alarm symbol and the display hour will flash along with a beep.
2. While the radio alarm symbol
rotate Tuning control knob
Tuning control knob
rotate the Tuning control knob
press Tuning control knob
3. Rotate the Tuning control knob and the display will
show the frequency options for the alarm.
The alarm options are as follows:
ONCE
DAILY
WEEKDAYS
WEEKENDS
Press the Tuning control knob
4.
Rotate Tuning control knob
(FM/AM) and press Tuning control knob
to
confirm the setting.
5. Rotate Tuning control knob
LISTENED> or <PRESET NO.> and press Tuning
control knob
6. Rotate Tuning control knob
desired volume and press Tuning control knob to con-
firm the volume. Radio alarm setting is now completed.
NOTE: If new radio alarm station is not selected, the
radio will select the last alarm station.
Setting HWS (Humane Wake System)
buzzer alarm
A beep tone will activate when selecting the HWS buzzer alarm.
to
The alarm beep starts to ring and it becomes quicker
as the time elapses. The alarm beep continues to ring
for one minute and stops. After one minute silence, the
alarm beep resume ringing. The alarm beep repeats
this cycle until you press the Power button
NOTE: The buzzer alarm can be set when the radio
is turned off.
1. Press and hold the buzzer alarm button
symbol and the display hour will flash along with a beep.
2. While the buzzer alarm symbol
rotate Tuning control knob
Tuning control knob
rotate the Tuning control knob
press Tuning control knob
14 ENGLISH
to select the hour and press
again to confirm hour setting. Then
to select the minute and
to confirm minute setting.
The alarm will sound
once
The alarm will sound
everyday
The alarm will sound only
on weekdays
The alarm will sound only
at weekends
to confirm the setting.
to select the band
to select <LAST
again to confirm the setting.
to select the
to select the hour and press
again to confirm hour setting. Then
to select the minute and
to confirm minute setting.
, the radio
is flashing,
again to
.
, the
is flashing,